반응형

시작 코드 중 동시 가열하기

M104 S170 ; Set Extruder temperature and continue
M140 S60 ; Set Heat Bed temperature and continue
M109 S170 ; Set Extruder temperature and wait
M190 S60 ; Set Heat Bed temperature and wait

M104 S{material_print_temperature_layer_0} ; Set Extruder temperature and continue
M140 S{material_bed_temperature_layer_0} ; Set Heat Bed temperature and continue

G28 ;Home
G29 ;Bed leveling

M190 S{material_bed_temperature_layer_0} ; Wait for Heat Bed temperature
M109 S{material_print_temperature_layer_0} ; Set Extruder temperature. Set and wait...

동작 순서

  • 센싱을 위한 170/60 가열 설정 및 기다림
  • 출력을 위한 가열 설정 (이걸 해주면 원점, ABL을 하는 도중 출력 온도까지 동시 상승 되므로 시작 시간을 절약할 수 있음)
  • 원점, ABL
  • 출력을 위한 가열을 기다림
  • 이 후 추가 처리 코드

 

코드 설명

M140 Sxxx : 히트 베드 설정 온도로 셋팅 후 다음 작업
M104 Sxxx : 핫엔드 설정 온도로 셋팅 후 다음 작업
M190 Sxxx : 히트 베드 설정 온도까지 기다림
M109 Sxxx : 핫엔드 설정 온도까지 기다림

170/60 도 까지 가열이 되면 다시 출력 온도로 설정 후, 원점/레벨링을 하면 된다.

펌웨어 기본값은 G28, G29 완료 후 M500이 자동 전송 되며, 값 저장 후 M420 S1이 자동 전송 됨.

반응형

관련글